Search results for 'fr'

Items 1 to 10 of 41 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. SF-RAZ2G

    SF-RAZ2G

    • Number of Jaws: 6 jaws
    • Size Range: 710mm-1100mm
    Specifically designed for the machining of couplings in one set up, The SF-RAZ2G indexes 180° on center line for easy machining access to both sides without manual intervention. The SF-RAZ2G has 6 jaws distributing clamping forces to preventing ovality and distortion. It is ideal for premium threads and high-low clamping capable.
    Learn More
  3. SF-RZ

    SF-RZ

    • Size Range: 400mm
    • Number of Jaws: 3 jaws
    Specifically designed for the machining of couplings up to 5 1/2" in one set up, The SF-RZ indexes 180° on centerline for easy machining access to both sides without manual intervention.
    Learn More
  4. NTL-C

    NTL-C

    • Size Range: 500mm - 1000mm
    • Number of Jaws: 3 jaws
    • Tongue & Groove
    • Closed Center
    The NTL-C Closed Center Power Chucks are well suited for mid to large batch production, high speed machining, and/or for fragile parts. The chuck is fully sealed, ideal for dry machining of castings and forgings or where high pressure coolant is used.
    Learn More
  5. NTL-D

    NTL-D

    • Size Range: 500mm - 1000mm
    • Number of Jaws: 3 jaws
    • Inch Serration
    • Closed Center
    The NTL-D Closed Center Power Chucks are well suited for mid to large batch production, high speed machining, and/or for fragile parts. The chuck is fully sealed, ideal for dry machining of castings and forgings or where high pressure coolant is used.
    Learn More
  6. BIG BORE ® BB-EXL-SC2G

    BIG BORE ® BB-EXL-SC2G

    • Size Range: 20" - 35" (510 - 900 mm)
    • Number of Jaws: 3 Jaws
    • Extra Large Through Hole
    • Inch serration
    • Proofline sealed
    BIG BORE® BB-EXL-SC2G front-end spring clamp power chuck is ideal for high productivity end machining of long pipe Learn More
  7. IL-D

    IL-D

    • Size Range: 1000mm - 1600mm
    • Number of Jaws: 3 Jaws and 6 Jaws
    • Inch (Module 2) Serration- Long Stroke
    • Closed Center
    The IL-D Closed Center Power Chucks are designed for chucking of very large parts. They are suitable for vertical machining applications thanks to the front protection of the slide ways. Learn More
  8. SF-RAZ

    SF-RAZ

    • Size Range: 30" - 41" (750 - 1050 mm)
    • Number of Jaws: 6 Jaws (3 self centering and 3 compensating jaws)
    • Fully automatic and controlled indexing
    • Indexing 180° in 2 seconds
    The SF-RAZ is a 6 jaws 2 postions hydraulic ring ring indexing chuck with large evacuation windows for easy chip flow and fully automatic and controlled indexing. Learn More
  9. RU-2-22

    RU-2-22

    • Universal for air, oil or coolant
    • For closed or open center cylinders (not for ZHVD-DFR)
    The RU-2-22 allows for rotary union for 2 media supply for closed or open center cylinders (not for ZHVD-DFR). Universal for air + oil/air + coolant. Learn More
  10. SIN-DFR

    SIN-DFR

    • Special cylinder to actuate diaphragm chuck
    • Up to 70 bar
    • Central bore for air/coolant, 1 or 2 media
    • Large/small piston area for opening/clamping
    • Stroke control via LPS-XS
    The SIN-DFR is a closed center rotating hydraulic cylinder to to actuate diaphragm chucks. Learn More

Items 1 to 10 of 41 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction