Search results for 'gh'

Items 1 to 10 of 94 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. SR-CL

    SR-CL

    • Premium Line-with fine adjustment
    The SR-CL features all of the SR series advantages along with centerline adjustment. CL equipment is used for workpieces with extremely high concentricity callouts. Fine radial readjustment of the workpiece is possible after material removal results in weight changes during machining. To readjust, simply dial the work piece in via the adjustment screws
    Learn More
  3. SF-RAZ2G

    SF-RAZ2G

    • Number of Jaws: 6 jaws
    • Size Range: 710mm-1100mm
    Specifically designed for the machining of couplings in one set up, The SF-RAZ2G indexes 180° on center line for easy machining access to both sides without manual intervention. The SF-RAZ2G has 6 jaws distributing clamping forces to preventing ovality and distortion. It is ideal for premium threads and high-low clamping capable.
    Learn More
  4. TSBR-CP

    TSBR-CP

    • Rigid Jaws
    • Size Range: 220mm-330mm
    • Number of Jaws: 3 jaws
    • Large Through-Hole
    TSBR-CP Open Center Pull Down Chucks are compensating with rigid jaws and are designed for clamping workpieces with the highest demand for parallelism or perpendicularity. TSBR-CP Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.
    Learn More
  5. TSBF-CP

    TSBF-CP

    • Floating Jaws
    • Size Range: 220mm-330mm
    • Number of Jaws: 3 jaws
    • Large Through-Hole
    TSBF-CP Open Center Pull Down Chucks are compensating with floating jaws and are designed for clamping workpieces with the highest demand for parallelism or perpendicularity. TSBF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.
    Learn More
  6. TSBR-C

    TSBR-C

    • Rigid Jaws
    • Size Range: 220mm-330mm
    • Number of Jaws: 3 jaws
    • Large Through-Hole
    TSBR-C Open Center Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSBR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.
    Learn More
  7. TSBF-C

    TSBF-C

    • Floating Jaws
    • Size Range: 220mm-330mm
    • Number of Jaws: 3 jaws
    • Large Through-Hole
    TSBF-C Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism or perpendicularity. TSBF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces.
    Learn More
  8. KNCS-NB-CL

    KNCS-NB-CL

    • Size Range: 630mm
    • Number of Jaws: 3 Jaws
    • Center Line-Radial fine adjustment with disengaging key
    • Quick Jaw Change Power Chuck
    • Wide Master Jaws
    The KNCS-NB-CL features all of the KNCS-NB series advantages along with centerline adjustment. CL equipment is used for workpieces with extremely high concentricity callouts. Fine radial readjustment of the workpiece is possible after material removal results in weight changes during machining. To readjust, simply dial the work piece in via the adjustment screws
    Learn More
  9. BP-C

    BP-C

    • Size Range: 220mm-320mm
    • Number of Jaws: 3 Jaws
    • Tongue & Groove
    • Open Center Power Chuck
    BP style sealed, low-maintenance chucks are great for general use on standard lathes becasue of their through hole, but are much better suited than standard chucks for more extreme environments including dry machining of castings and forgings and/or when high pressue coolant is used. Becasue they are fully sealed, BP style chucks posess a longer life, with limited wear, maintaining consistent clamping forces and high repeatability.
    Learn More
  10. BP-M

    BP-M

    • Size Range: 220mm-320mm
    • Number of Jaws: 3 jaws
    • Metric Serration
    • Open Center Power Chuck
    BP style sealed, low-maintenance chucks are great for general use on standard lathes becasue of their through hole, but are much better suited than standard chucks for more extreme environments including dry machining of castings and forgings and/or when high pressue coolant is used. Becasue they are fully sealed, BP style chucks posess a longer life, with limited wear, maintaining consistent clamping forces and high repeatability.
    Learn More

Items 1 to 10 of 94 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction