Collet Chucks

6 Item(s)

per page

List  Grid 

Set Descending Direction
  1. KSZ-MB

    KSZ-MB

    • Size Range: 40mm - 80mm
    • For bars 3mm - 80mm
    • Push Actuation
    • Uses DIN 6343 collets
    KSZ-MB Collet Chucks utilize DIN 6343 collets and are designed for the efficient machining of bar stock on automatic bar machines with bar feeders. Round, square and hexagonal material can be clamped simply by changing collets. Learn More
  2. KSZ-DZN

    KSZ-DZN

    • Size Range: 42mm - 65mm
    • For bars 4mm - 65mm
    • Draw Actuation
    KSZ-DZN Collet Chucks are designed for the safe clamping of bars, and the draw collet system provides the highest axial and radial rigidity. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck. Learn More
  3. KSZ-AZN

    KSZ-AZN

    • Size Range: 42mm - 65mm
    • For bars & shafts 4mm - 65mm
    • Draw Actuation
    • Rigid Axial Workstop for Shafts

    KSZ-AZN Collet Chucks are designed for the safe clamping of shafts, and the pull down effect onto the workstop allows for high axial positioning accuracy of the shafts. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.

    Learn More
  4. KSZ-NZN

    KSZ-NZN

    • Size Range: 42mm - 65mm
    • For bars & shafts 4mm - 65mm
    • Draw Actuation
    • Rigid Axial Workstop for Shafts
    • Collet in Fixed Axial Position
    KSZ-NZN Collet Chucks hold the collet in a fixed axial position, therefore there is no axial movement or axial forces when clamping. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck. Learn More
  5. KSZ-AZL

    KSZ-AZL

    • Size Range: 100mm
    • For bars & shafts 42mm - 100mm
    • Draw Actuation
    • Rigid Axial Workstop for Shafts

    KSZ-AZL Collet Chucks are designed for the safe clamping of bars and shafts, and include preparation for air sensing. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.

    Learn More
  6. GF 80

    GF 80

    • Spring actuated
    • Clamping and positioning of short bar material
    • Positioning of shaft type components in automatic production cycle
    The GF 80 is a INCH serration bar pulling chuck that is spring actuated for stationary outside clamping. Learn More

6 Item(s)

per page

List  Grid 

Set Descending Direction