New Technology

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. KNCS-2G

    KNCS-2G

    • Size Range: 210mm - 400mm
    • Number of Jaws: 3 Jaws
    Sealed, clamped, and ready to turn—the next generation of quick jaw change chucks has arrived. The newest addition to the series, the KNCS-2G, offers the same superior flexibility, minimal set up times, and high repeatability as the original KNCS-N, but with added protection and efficiency, making it ideal for mass production applications. Learn More
  3. KNCS-NB-CL

    KNCS-NB-CL

    • Size Range: 630mm
    • Number of Jaws: 3 Jaws
    • Center Line-Radial fine adjustment with disengaging key
    • Quick Jaw Change Power Chuck
    • Wide Master Jaws
    The KNCS-NB-CL features all of the KNCS-NB series advantages along with centerline adjustment. CL equipment is used for workpieces with extremely high concentricity callouts. Fine radial readjustment of the workpiece is possible after material removal results in weight changes during machining. To readjust, simply dial the work piece in via the adjustment screws
    Learn More
  4. SJL-C

    SJL-C

    • Size range: 9" - 16" (225 - 400mm)
    • Number of Jaws: 6 Jaws
    • Tongue and Groove
    • 2 + 2 + 2 Movement
    • Proofline Sealed
    The SJL-C 2 + 2 + 2 Equalizing Power Chucks are ideal for clamping of deformation sensitive components. SJL-C Chucks have high radial and axial clamping accuracy, are fully sealed and oil bath lubricated, and are ideal for high speeds. Learn More
  5. SJL-M

    SJL-M

    • Size Range: 8" - 16" (225mm - 400mm)
    • Number of Jaws: 6 Jaws
    • Metric Serration
    • 2 + 2 + 2 Movement
    • Proofline Sealed
    The SJL-M 2 + 2 + 2 Equalizing Power Chucks are ideal for clamping of deformation sensitive components. SJL-M Chucks have high radial and axial clamping accuracy, are fully sealed and oil bath lubricated, and are ideal for high speeds. Learn More
  6. AcuGrind

    AcuGrind

    • Size Range: 80mm - 250 mm
    • Proofline Sealed
    For OD and ID clamping
    Built-in pneumatic actuation, no hydraulic cylinder required
    Sealed standard chuck for high-precision universal grinding applications
    Highest accuracy - runout and repeatability Learn More
  7. Type D-VARIO

    Type D-VARIO

    • Size Range: 8" (215mm)
    • Fine adjustment of the center line
    • Key Lock System = Quick positioning of jaws for gears with different number of teeth
    • Jaws for pitch line or outside clamping
    • Proofline Sealed
    Type D-VARIO offers a Flexible solution for grinding with quick adjustment for short set up times. Learn More
  8. BIG BORE® BB-N-EXL2G

    BIG BORE® BB-N-EXL2G

    • Size Range: 20" - 35" (510 - 900 mm)
    • Number of Jaws: 3 Jaws
    • Extra Large Through Hole
    • Extended extra long jaw stroke
    • Inch serration
    BIG BORE ® BB-N-EXL2G air chuck is ideal for rapid and clamping stroke and end machining of long pipe with collars Learn More
  9. BIG BORE® BB-AZ2G

    BIG BORE® BB-AZ2G

    • Size Range: 27" - 39" (685 - 1000 mm)
    • Number of Jaws: 3 Jaws
    • Extra Large Through Hole
    • Inch Serration
    • Self Centering or Compensating
    BIG BORE® BB-AZ2G air chuck is ideal for end machining of straight or bent pipe. Learn More
  10. BIG BORE®  BB-FZA2G

    BIG BORE® BB-FZA2G

    • Size Range: 29" - 36" (740 - 920 mm)
    • Number of Jaws: 6 Jaws
    • Extra Large Through Hole
    • Inch Serration
    BIG BORE® BB-FZA2G air 6-jaw sequence chuck is ideal for high efficiency machining of bent or straight pipe in shorter cycle times Learn More

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction