Pull Down Chucks

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. TSF-C

    TSF-C

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Floating Jaws
    • Active Pull Down
    TSF-C Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  2. TSR-C

    TSR-C

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Active Pull Down
    TSR-C Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  3. TSF-C

    TSF-C

    • Size Range: 170mm - 315mm
    • Number of Jaws: 2 Jaws
    • Self Centering
    • Floating Jaws
    • Active Pull Down
    TSF-C Two Jaw Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  4. TSR-RM

    TSR-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Quick Jaw Change with Pallets
    TSR-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with rigid jaws (for precise clmaping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  5. TSF-RM

    TSF-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Floating Jaws
    • Quick Jaw Change with Pallets
    TSF-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  6. TSR-CP

    TSR-CP

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Compensating
    • Rigid Jaws
    The TSR-CP is designed for the clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSR-CP features rigid base jaws. Learn More
  7. TSF-CP

    TSF-CP

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Compensating
    • Floating Jaws
    The TSF-CP is designed for the clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSF-CP features floating base jaws. Learn More
  8. TSF-CP

    TSF-CP

    • Size Range: 170mm - 315mm
    • Number of Jaws: 2 Jaws
    • Compensating
    • Floating Jaws

    The TSF-CP two jaw chuck is designed for the clamping of rectangular or irregular shaped shafts, or clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSF-CP features floating base jaws.

    Learn More
  9. FRC-N

    FRC-N

    • Size Range: 215mm - 365mm
    • Number of Jaws: 3 Jaws
    • Compensating
    • Rigid Jaws
    • Large Compensating Stroke

    FRC-N Pull Down Chucks are designed for the compensating clamping of shafts between centers, where the clamping diameter is not concentric to the workpiece axis. The grip force of the chuck supplies the torque necessary to machine the workpiece and pulls it down to the axial datum (center point / axial stop). Due to its high rigidity against torsion, the chuck is ideal for turning as well as milling operations.

    Learn More
  10. FRS

    FRS

    • Size Range: 215mm - 365mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Large Through Hole
    FRS Pull Down Chucks are designed for the self centering clamping of flange or shaft type workpieces where the reference point is not a center but the OD of the workpiece. The through hole of the chuck allows it to swallow the workpiece if needed. Due it its high rigidity against torsion, the chuck can be used for milling as well as turning. Learn More

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction