Quick Jaw Change

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. KNCS-N

    KNCS-N

    • Size Range: 140mm - 630mm
    • Number of Jaws: 3 Jaws
    • Tongue & Groove Serration
    • Through Hole
    The KNCS-N Quick Jaw Change Power Chucks feature jaws that can be changed out in less than a minute. Thanks to the unique wedge bar drive, there is a minimum loss in gripping force during high speed applications, and high concentricity and repeatability is ensured. KNCS-N Chucks are suitable for high-low clamping. Learn More
  3. KNCS-N

    KNCS-N

    • Size Range: 210mm - 325mm
    • Number of Jaws: 2 Jaws
    The KNCS-N Quick Jaw Change Power Chucks feature jaws that can be changed out in less than a minute. Thanks to the unique wedge bar drive, there is a minimum loss in gripping force during high speed applications, and high concentricity and repeatability is ensured. KNCS-N Chucks are suitable for high-low clamping. Learn More
  4. TSR-RM

    TSR-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Quick Jaw Change with Pallets
    TSR-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with rigid jaws (for precise clmaping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  5. TSF-RM

    TSF-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Floating Jaws
    • Quick Jaw Change with Pallets
    TSF-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  6. KNCS-NBX

    KNCS-NBX

    • Size Range: 425mm - 1000mm
    • Number of Jaws: 3 Jaws
    • Inch, Metric, Tongue & Groove Serrations
    • Extra Large Through Hole
    The KNCS-NBX Quick Jaw Change Power Chucks feature an extra-large through hole and jaws that can be changed out in less than a minute. KNCS-NBX Chucks can utilize your exisiting top jaws from almost any manufacturer. Learn More
  7. KNCS-NB

    KNCS-NB

    • Size Range: 210mm - 800mm
    • Number of Jaws: 3 Jaws
    • Inch, Metric, Tongue & Groove Serrations
    • Large Through Hole
    The KNCS-NB Quick Jaw Change Power Chucks feature a large through hole and jaws that can be changed out in less than a minute. KNCS-NB Chucks can utilize your exisiting top jaws from almost any manufacturer. Learn More
  8. KNCS-2G

    KNCS-2G

    • Size Range: 210mm - 400mm
    • Number of Jaws: 3 Jaws
    Sealed, clamped, and ready to turn—the next generation of quick jaw change chucks has arrived. The newest addition to the series, the KNCS-2G, offers the same superior flexibility, minimal set up times, and high repeatability as the original KNCS-N, but with added protection and efficiency, making it ideal for mass production applications. Learn More
  9. KNCS-NB-CL

    KNCS-NB-CL

    • Size Range: 630mm
    • Number of Jaws: 3 Jaws
    • Center Line-Radial fine adjustment with disengaging key
    • Quick Jaw Change Power Chuck
    • Wide Master Jaws
    The KNCS-NB-CL features all of the KNCS-NB series advantages along with centerline adjustment. CL equipment is used for workpieces with extremely high concentricity callouts. Fine radial readjustment of the workpiece is possible after material removal results in weight changes during machining. To readjust, simply dial the work piece in via the adjustment screws
    Learn More
  10. TX-RV

    TX-RV

    • Size Range: 8"" - 21"" (210mm - 530mm)
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Centrifugal force compensation
    TX-RV Pull Down Chucks are designed for the self centering clamping of workpieces with the highest parallelism requirements. The constant grip force ensures consistent quality of the workpieces. Learn More

Items 1 to 10 of 16 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction