Search

Items 1 to 10 of 186 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. HG-N

    HG-N

    • Size Range: 160mm - 630mm
    • Number of Jaws: 3 Jaws
    • Tongue & groove serrations
    • Original SMW jaw system
    • Through hole

    The HI-GRIP HG-N quick jaw change manual chucks feature a wedge bar design that guarantees highest precision, concentricity, and repeatability as well as the highest gripping force. Jaws can be changed in less than a minute, and jaw sets can be radially adjusted and reversed. The HG-N Chucks utilize SMW's original jaw design, and jaws can be used with other SMW Autoblok quick jaw change chucks such as the KNCS-N.

    Learn More
  3. KNCS-N

    KNCS-N

    • Size Range: 140mm - 630mm
    • Number of Jaws: 3 Jaws
    • Tongue & Groove Serration
    • Through Hole
    The KNCS-N Quick Jaw Change Power Chucks feature jaws that can be changed out in less than a minute. Thanks to the unique wedge bar drive, there is a minimum loss in gripping force during high speed applications, and high concentricity and repeatability is ensured. KNCS-N Chucks are suitable for high-low clamping. Learn More
  4. TSF-C

    TSF-C

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Floating Jaws
    • Active Pull Down
    TSF-C Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  5. TSR-C

    TSR-C

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Active Pull Down
    TSR-C Pull Down Chucks are self centering with rigid jaws (for precise clamping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  6. TSF-C

    TSF-C

    • Size Range: 170mm - 315mm
    • Number of Jaws: 2 Jaws
    • Self Centering
    • Floating Jaws
    • Active Pull Down
    TSF-C Two Jaw Pull Down Chucks are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-C Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  7. KNCS-N

    KNCS-N

    • Size Range: 210mm - 325mm
    • Number of Jaws: 2 Jaws
    The KNCS-N Quick Jaw Change Power Chucks feature jaws that can be changed out in less than a minute. Thanks to the unique wedge bar drive, there is a minimum loss in gripping force during high speed applications, and high concentricity and repeatability is ensured. KNCS-N Chucks are suitable for high-low clamping. Learn More
  8. TSR-RM

    TSR-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Rigid Jaws
    • Quick Jaw Change with Pallets
    TSR-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with rigid jaws (for precise clmaping on pre-machined diameters), and are designed for clamping workpieces with the highest demand for parallelism. TSR-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  9. TSF-RM

    TSF-RM

    • Size Range: 170mm - 530mm
    • Number of Jaws: 3 Jaws
    • Self Centering
    • Floating Jaws
    • Quick Jaw Change with Pallets
    TSF-RM Pull Down Chucks feature quick jaw change via pallets for quick setup. They are self centering with floating jaws (to clamp raw and easily deformed workpieces), and are designed for clamping workpieces with the highest demand for parallelism. TSF-RM Chucks are proofline® sealed, which allows for long maintenance intervals and increased productivity. Their constant grip force ensures for consistent quality of workpieces. Learn More
  10. TSF-CP

    TSF-CP

    • Size Range: 170mm - 650mm
    • Number of Jaws: 3 Jaws
    • Compensating
    • Floating Jaws
    The TSF-CP is designed for the clamping of shafts or parts where the referencing is not the OD of the part but a center or a centering diameter. A center point or a centering insert will center the workpiece and the jaws will clamp compensating and actively pull the workpiece down to the datum. The TSF-CP features floating base jaws. Learn More

Items 1 to 10 of 186 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction