Stationary

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. APS

    APS

    With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.



    Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available). The built-in air cleaning function ensures that the clamping system's supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo
    function. The premium APS system features the ability to monitor the clamping device through air sensing.


    Learn More
  2. US-CL

    US-CL

    • Size Range: 3" - 12" (80mm - 315mm)
    • Number of Jaws: 2 Jaws
    • Closed Center
    • Inch or Tongue - Groove Serration
    • Hydraulic Cylinder Module
    The US-CL Hydraulic Stationary Chucks feature gripping units that are well suited for special purpose machines and transfer lines. The can also be used as loading chucks to handle workpieces. Learn More
  3. US-A

    US-A

    • Size Range: 3" - 12" (80mm - 315mm)
    • Number of Jaws: 2 Jaws
    • Closed Center
    • Inch, Metric or Tongue - Groove Serration
    • Hydraulic Cylinder Module
    The US-A Hydraulic Stationary Chucks feature gripping units that are well suited for special purpose machines and transfer lines. The can also be used as loading chucks to handle workpieces. Learn More
  4. US-Large Diameters

    US-Large Diameters

    • Size Range: 400mm - 800mm
    • Number of Jaws: 2, 3 or 4 Jaws
    • Normal or long stroke depending on chuck model
    • Gripping of large components on vertical or horizontal machining centers.
    • Stationary cylinder + chuck unit
    The US-Large Diameters is a pneumatic static cylinder for 2 or 3 or 4 jaws that is ideal for gripping of large components on vertical or horizontal machining centers. Learn More
  5. HB-D

    HB-D

    • Size Range: 165mm - 315mm
    • Number of Jaws: 2 or 3 Jaws
    • Closed Center
    • Inch Serration
    • Hydraulic Cylinder Module
    HB-D Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More
  6. HB-C

    HB-C

    • Size Range: 165mm - 315mm
    • Number of Jaws: 3 Jaws
    • Closed Center
    • Tongue & Groove Serration
    • Hydraulic Cylinder Module
    HB-C Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More
  7. HB-M

    HB-M

    • Size Range: 5" - 12" (130mm - 315mm)
    • Number of Jaws: 2 or 3 Jaws
    • Closed Center
    • Metric Serration
    • Hydraulic Cylinder Module
    HB-M Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More
  8. PB-D

    PB-D

    • Size Range: 5" - 12" (130mm - 315mm)
    • Number of Jaws: 2 or 3 Jaws
    • Closed Center
    • Inch Serration
    • Pneumatic Cylinder Module
    PB-D Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More
  9. PB-C

    PB-C

    • Size Range: 5" - 12" (130mm - 315mm)
    • Number of Jaws: 3 Jaws
    • Closed Center
    • Tongue & Groove Serration
    • Pneumatic Cylinder Module
    PB-C Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More
  10. PB-M

    PB-M

    • Size Range: 5" - 12" (130mm - 315mm)
    • Number of Jaws: 2 or 3 Jaws
    • Closed Center
    • Metric Serration
    • Pneumatic Cylinder Module
    PB-M Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines. Learn More

Items 1 to 10 of 15 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction