CCS
CCS
New chuck changing system
- Highest repeatability and change-over accuracy
- Automatic coupling of chuck in a single actuation
- Large through hole
- Optical control for the locking status
PRODUCT FEATURES
- Highest repeatability and change-over accuracy
- Automatic coupling of chuck in a single actuation
- Large through hole
- Optical control for the locking status
- Protected against contamination
- Automatic „push off“ of the adapter fl ange when opening the CCS
STANDARD EQUIPMENT
- Chuck switching system CCS
- Coupling sleeve
- Key
- Bayonet draw tube blank
SMW‑AUTOBLOK as a leading manufacturer of workholding has developed the new and innovative chuck changing system CCS. The CCS chuck changing system can be installed onto new machines or can be retrofitted to any existing CNC lathe. Standardized adapter parts allow the use of different kinds of workholding devices(for example 2-jaw chucks, 3-jaw chucks, collet chucks, mandrels and manual fixtures) on the same chuck changing system. With a simple turn of the key any workholding device is connected to the machine spindle as well as to the draw tube of the actuating cylinder. This guarantees easy, quick and safe operation. Instead of spending half an hour to changeover a chuck it simply becomes a matter of minutes. The hardened and precise ground chuck changing system and adapter parts offer highest accuracy when changing any device. A large through hole and a visual safety control of the locking status completes the versatility of the SMW‑AUTOBLOK chuck changing system. The chuck changing system is now available for ASA spindles A6, A8, A11 and for cylindrical spindles for diameters Z170, Z220, Z300.